2 Way Fire (Pillar) Hydrants are Wet-barrel fire hydrants for use in water-supply service outdoor areas where the climate is mild and freezing temperatures do not occur. A wet-barrel hydrant has one or more valve openings above the ground line and, under normal operating conditions, the entire interior of the hydrant is subjected to water pressure at all times.

Description:
Breeching Inlets are installed outside the building or any easily accessible area in the building for firefighting purposes by fire brigade personnel to access the inlet. Breeching Inlets are fitted with inlet connection at fire brigade access level and outlet connection at specified points. It is normally dry but capable of being charged with water by pumping from fire service appliances.

Key Specificatoins:
●Material:Cast iron/Dutile iron
●Inlet:2.5” BS instantaneous male copper alloy to BS 1982
●Outlet:4” BS 4504 / 4” table E /4” ANSI 150#
●Working Pressure:16bar
●Test pressure: Body test at 22.5bar
●Manufacturer according to BS 5041 Part 3*

Key Specificatoins:
●Material:Brass
●Inlet: 2.5”BSPT
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar
●Reduced outlet static pressure can be set form 5bar to 8bar
●Outlet pressure remain constant with inlet pressure range from 7bar to 20bar
●Test pressure: Body test at 30bar
●Minimum flowrate up to 1400L/M
●Manufacturer according to BS 5041 Part 1*

Key Specificatoins:
●Material:Brass
●Inlet: 1.5”&2.5” NPT
●Outlet:1.5”&2.5” NST
●Working pressure:16bar
●Test pressure: Body test at 24bar
●Manufacturer according to NFPA standard

Key Specificatoins:
●Material:Brass
●Inlet:2.5” BSP
●Outlet:2.5” BS 336
●Working pressure:16bar
●Test pressure:valve seat test at 16.5bar, Body test at 22.5bar
●Manufacturer according to BS 5041 Part 1*
●Water flow rate:8.5L/S@4Bar outlet pressure

Key Specificatoins:
●Material:brass
●Inlet:2.5” flange
●Outlet:2.5” BS 336
●Working pressure:16bar
●Test pressure:valve seat test at 16.5bar, body test at 22.5bar
●Manufacturer according to BS 5041 Part 1*
●Water flow rate:8.5L/S@4Bar outlet pressure

●Material:Brass
●Inlet: 2.5” BS 4504 / 2.5” table E /2.5” ANSI 150#
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar
●Test pressure: Body test at 30bar
●Manufacturer according to BS 336

Key Specificatoins:
●Material:brass
●Inlet:2.5” flange
●Outlet:2.5” BS 336
●Working pressure:16bar
●Test pressure:valve seat test at 16.5bar, body test at 22.5bar
●Manufacturer according to BS 5041 Part 1*
●Water flow rate:8.5L/S@4Bar outlet pressure

Key Specificatoins:
●Material: brass / aluminum
●Inlet: 1” /2” /2.5” /3” /4”
●Outlet: 25 /50 / 70 /80 /100
●Working pressure:16bar
●Test pressure: Body test at 24bar
●Manufacturer according to Russia Standard

Key Specificatoins:
●Material:Brass / aluminum
●Inlet: 1.5” /2” /2.5”
●Outlet: DN40 / DN50 /DN65
●Working pressure:16bar
●Test pressure: Body test at 24bar
●Manufacturer according to Japan standard

Key Specificatoins:
●Material:Brass / Aluminum
●Inlet: 1.5” /2” /2.5” /3” /4” STORZ
●Outlet: DN40 / DN50 / DN65 / DN80 / DN100
●Working pressure:16bar
●Test pressure: Body test at 24bar
●Manufacturer and certified to DIN 86020&NEN 3374